CAPITAL TW1440 PRECISION CENTRE LATHE – 360 × 1000MM CAPACITY

The Capital TW1440 is a versatile precision centre lathe designed for general engineering, maintenance, repair and workshop machining applications.

Offering a 360mm swing over the bed, 1000mm between centres and a generous 52mm spindle bore, the TW1440 provides excellent capacity in a compact, practical machine. Its broad spindle-speed range, powered longitudinal and cross feeds, quick-change toolpost and two-axis digital readout make it suitable for both one-off components and regular workshop production.

Powered by a 1.5kW, 240V single-phase motor, the TW1440 can be installed in workshops where three-phase power is unavailable.

The machine is suitable for facing, parallel turning, taper turning, drilling, boring, grooving, knurling and metric thread cutting across a range of ferrous and non-ferrous materials.

MAIN CAPACITIES

• Swing over bed: 360mm
• Swing over support: 223mm
• Swing through gap: 502mm
• Centre height: 179mm
• Distance between centres: 1000mm
• Bed width: 187mm
• Bed height: 290mm
• Maximum tool section: 16 × 16mm
• Cross-slide travel: 160mm
• Compound-slide travel: 95mm

HEADSTOCK

• Spindle bore: 52mm
• Spindle nose: D1-5 camlock
• Spindle-bore taper: MT6
• Spindle-speed range: 70–2000rpm

FEEDS AND THREADS

• Leadscrew diameter: 22mm
• Metric thread range: 0.4–7mm
• Longitudinal feed range: 0.052–1.392mm/rev
• Cross-feed range: 0.014–0.380mm/rev

TAILSTOCK

• Tailstock-sleeve diameter: 32mm
• Tailstock-sleeve taper: MT3

MOTOR AND POWER SUPPLY

• Main motor: 1.5kW
• Power supply: 240V, single phase, 50Hz

KEY FEATURES

• Generous 52mm spindle bore
• D1-5 camlock spindle nose
• Spindle-speed range from 70 to 2000rpm
• Powered longitudinal and cross feeds
• Metric thread-cutting capability
• Two-axis digital readout system
• Quick-change tool post
• Gap-bed design for larger-diameter components
• Foot-operated spindle brake
• Chuck safety guard
• Halogen work light
• Built-in cabinet base with storage drawers
• Fixed and travelling work supports
• Suitable for standard 240V workshop power

STANDARD ACCESSORIES

The Capital TW1440 is supplied with a comprehensive standard accessory package, including:

• Two-axis digital readout system
• Three-jaw chuck
• Four-jaw chuck
• Faceplates
• Fixed steady rest
• Follow rest
• Halogen work light
• Built-in cabinet base with drawers
• Chuck guard
• Foot brake
• Thread-chasing dial
• Oil gun
• Toolbox
• Operating manual

WEIGHT AND DIMENSIONS

• Approximate net weight: 510kg
• Approximate gross packed weight: 600kg
• Packing dimensions: 1930 × 760 × 1600mm

The Capital TW1440 is ideally suited to general engineering workshops, maintenance departments, automotive and agricultural repair businesses, mining support operations, schools, training facilities and fabrication workshops requiring dependable in-house machining capability.

Capital Equipment Machinery Sales can assist with delivery, installation, commissioning, operator training, tooling selection and ongoing servicing. Additional tooling and workholding packages can also be supplied to suit your machining requirements.

Contact Capital Equipment Machinery Sales for current availability, pricing and further information on the Capital TW1440 precision centre lathe.

SHENYANG SMTCL HORIZONTAL LATHES – RELIABLE TURNING SOLUTIONS FROM LIGHT MACHINING TO HEAVY-DUTY PRODUCTION

Shenyang SMTCL horizontal lathes combine rigid construction, proven machine-tool engineering and flexible configuration options to deliver accurate, dependable machining across a wide range of turning applications.

The range includes conventional centre lathes, heavy-duty turning machines and specialist pipe-threading lathes. Machines are available in multiple swing diameters, spindle bores, bed lengths and control configurations to suit everything from everyday workshop repairs to continuous production machining.

SMTCL horizontal lathes can perform a wide variety of operations, including external and internal turning, facing, taper turning, grooving, boring, drilling and thread cutting.

Key features available across the range include:

• Rigid, high-strength cast-iron machine construction
• Wide range of swing diameters and turning lengths
• Standard and large-bore spindle configurations
• High spindle torque for demanding machining operations
• Geared, variable-speed and servo-driven spindle options
• Manual, hydraulic and power-chuck configurations
• Rapid axis movement for reduced non-cutting time
• Manual, hydraulic and programmable tailstock options
• Four-position, six-position and multi-station turret configurations
• Metric, imperial, modular and diametral thread-cutting capability on selected models
• Full or semi-enclosed guarding options
• Integrated coolant systems
• Chip trays and powered chip conveyors
• Work lights and operator-accessible controls
• Steady-rest and travelling-rest options for long components
• Configurations suitable for Australian workshop power supplies

CNC CONTROL OPTIONS

Depending on the selected machine and application, SMTCL horizontal CNC lathes can be supplied with control systems from leading manufacturers such as FANUC and Siemens, along with GSK and other cost-effective CNC options.

Control configurations are available for straightforward two-axis turning through to more advanced production applications. Capital Equipment Machinery Sales can recommend a control system based on your operators’ experience, programming requirements, production volume and budget.

OPTIONAL EQUIPMENT

Available options may include:

• Larger manual or hydraulic chucks
• Three-jaw and four-jaw chuck configurations
• Collet-chuck systems
• Hydraulic tailstocks
• Multi-station CNC turrets
• Gang-tool arrangements
• Steady rests and travelling rests
• Larger spindle bores
• Boring-bar holders
• Tool-setting systems
• Bar feeders and bar-support systems
• Parts catchers
• Powered chip conveyors
• Additional safety guarding and interlocks
• Tooling packages and workholding equipment
• Customised machine configurations

SMTCL horizontal lathes are suitable for machining:

• Shafts, pins and rollers
• Bushes, sleeves and flanges
• Discs, hubs and pulleys
• Hydraulic-cylinder components
• Mining and drilling components
• Pipes and threaded tubular products
• Agricultural and transport components
• Repair and maintenance parts
• High-volume production components
• Large-diameter and long-shaft workpieces

These machines are well suited to general engineering workshops, mining support operations, oil and gas services, transport, agricultural manufacturing, hydraulic repair, heavy equipment maintenance and production machining.

Capital Equipment Machinery Sales can assist with machine selection, workholding, tooling, delivery, installation, commissioning, operator training and ongoing servicing. Our technicians can provide continued support throughout the working life of the machine.

Provide us with your maximum component diameter, required machining length, spindle-bore requirement, material type, workpiece weight and expected production volume, and we can recommend the correct SMTCL horizontal lathe and configuration for your application.

Contact Capital Equipment Machinery Sales for available models, detailed specifications and a quotation tailored to your machining requirements.

Denver's HG series lathes are designed for demanding heavy-duty machining applications. It combines straightforward operation with excellent rigidity, stability and load-bearing capacity, making it ideal for the heavy turning of moulds, gears, wheels, shafts, spindles and similar components.

Base
The rigid base is manufactured from high-quality Meehanite cast iron for heavy-duty cutting. Its robust construction provides increased load capacity and greater stability during machining.

Compound Rest
A four-point clamping system provides excellent compound-rest stability. The wide toolpost and top slide are induction-hardened and precision-ground to ensure accuracy and a long service life.

Spindle and Headstock
The headstock provides 12 spindle speeds, while the spindle is supported at three points by precision bearings. The gears and spindle are manufactured from high-quality alloy steel, heat-treated and precision-ground for superior hardness, strength and durability.
The spindle is available with either an 80 mm or 105 mm bore.

Gearbox
The metric and imperial gearbox supports metric, imperial, diametrical-pitch (DP), module-pitch (MP) and multiple-start thread cutting without requiring change gears. Its wide threading range and straightforward operation help improve productivity.
Imperial threading is available down to 2 TPI, providing a broader threading range and greater operating flexibility than many comparable lathes.

Carriage and Saddle
The bedway contact surfaces are lined with Turcite-B to reduce friction and wear. The dovetail slideway surfaces are induction-hardened and precision-ground to maintain accuracy and provide a long service life.

Apron
A forced-lubrication system ensures that the slideways receive consistent lubrication, helping maintain turning accuracy while reducing wear.
An integrated safety mechanism helps prevent collisions during operation.

Cross-Slide Screw
The cross-slide screw is supported at two points, providing the strength and stability required for heavy-duty turning.

Tailstock
A two-stage tailstock clamping system improves stability during heavy turning and drilling operations.
A two-stage feed mechanism provides greater control and easier operation.

Capacity
(HG-660) Swing over bed: 660mm
(HG-760) Swing over bed: 760mm
(HG-800) Swing over bed: 800mm
(HG-840) Swing over bed: 840mm

(HG-660) Swing over cross slide: 400mm
(HG-760) Swing over cross slide: 500mm
(HG-800) Swing over cross slide: 540mm
(HG-840) Swing over cross slide: 580mm

(HG-660) Swing over gap: 930mm
(HG-760) Swing over gap: 1030 mm
(HG-800) Swing over gap: 107mm
(HG-840) Swing over gap: 1110mm
Distance between centres: 1170/1670/2170/3170/4170/5000mm

Bed
Width of Bed: 420mm
Width of gap (spindle end face): 305mm
(1200) Length of bed: 2600mm
(1700) Length of bed: 3100mm
(2200) Length of bed: 3600mm
(3200) Length of bed: 4600mm
(4200) Length of bed: 5600mm
(5000) Length of bed: 6400mm

Headstock
Spindle bore diameter: 80mm; optional 105mm
Number of spindle speeds: 12 steps
Range of spindle speeds: 23-1300 rpm
Spindle nose: A1-8
Optional: A2-8 for 105 mm bore
Optional: D1-8, D2-8
Optional: A2-11 for 105 mm bore

Carriage
Width of Carriage: 670mm
Cross slide travel: 400mm
Top slide travel (compound slide): HG-660/800:150 mm
Top slide travel (compound slide): HG-760/840:240 mm
Tool shank: 25x25mm

Tailstock
Diameter of barrel: 80mm
Travel of barrel: 200mm
Taper of barrel: MT5

Threads
Lead screw diameter & pitch: 45mm diameter x 12mm pitch/1.77” diameter x 2 TPI
Range of metric pitches: 0.8-14 mm
Range of imperial pitches: 2-28 TPI
Range of diametrical pitches: 4-56 DP
Range of module pitches: 0.5-7 MP

Feeds
Feed rod diameter: 32mm
Range of longitudinal Feeds: 0.05-0.7 mm/rev
Range of cross Feeds: 0.025-0.35 mm/rev

Motor
Main spindle Motor: 10HP (optional 15HP)
Coolant pump Motor: 1/8HP

This machine is designed for turning and machining large workpieces and steel bar stock. It is well suited to demanding industrial applications, including oil and gas pipeline production, aerospace manufacturing and heavy-duty shaft machining.

Spindle and Headstock
-The spindle is available with either a 105 mm (4 in) or 152 mm (6 in) bore and provides 12 spindle speeds. A turbine-type speed-change mechanism helps prevent gear jumping, while the headstock is supported at three points to provide excellent rigidity and stability.

-Models with a spindle bore of 152 mm (6 in) or larger are equipped with an adjustable electromagnetic brake. This allows the braking response to be adapted to different workpiece materials and spindle speeds.

-The gears and shafts are manufactured from high-grade alloy steel and supported by quality NSK bearings, providing durable cutting performance and reduced operating noise.

-A sealed oil-bath lubrication system uses a mechanical pump to provide forced oil circulation, ensuring consistent and effective lubrication throughout the headstock.
The headstock shown is equipped with a 152 mm (6 in) spindle bore and a 12-speed spindle system.

Base
The machine bed is manufactured from high-strength Meehanite cast iron and carefully stabilised to maintain alignment and machining accuracy. The bedways are induction-hardened and precision-ground for excellent wear resistance and long service life.
The one-piece cast base provides superior rigidity and stability, supporting greater machining capacity under demanding operating conditions.

Gearbox
The quick-change universal gearbox supports metric, imperial, diametrical-pitch (DP), module-pitch (MP) and multiple-start thread cutting without requiring change gears. Its broad threading range and straightforward controls improve operating efficiency and productivity.

Tailstock
The tailstock features a two-stage feed mechanism and a saddle-assisted movement system, allowing the tailstock body to travel smoothly along the bed with minimal operator effort.

Electrical System
The machine is equipped with a 20 HP motor, a two-stage safety start-up system and overload protection that automatically disconnects the power supply if an unsafe load is detected.

Apron
The apron is equipped with rapid traverse, forward and reverse movement, and an integrated safety mechanism. A sealed oil-bath system provides automatic lubrication, while rapid cross-feed improves operating efficiency.

Saddle
The saddle surfaces receive an anti-friction treatment and are supplied with regular oil lubrication, reducing wear and ensuring smooth, durable operation.

Castings
The principal structural components, including the base, headstock, saddle and tailstock, are manufactured from high-quality FC-30 cast iron. These components are annealed to relieve internal stresses, improve dimensional stability and minimise deformation.

Precision Treatment
Critical components—including the bedways, spindle, saddle, cross-slide dovetail surfaces, top slide and tailstock quill—are treated using high-frequency hardening to improve surface hardness, wear resistance and service life.

Capacity
(HT-860) Swing over bed: 860 mm
(HT-960) Swing over bed: 960 mm
(HT-1120) Swing over bed: 1120 mm
(HT-1220) Swing over bed: 1220 mm
(HT-860) Swing over cross slide: 540 mm
(HT-960) Swing over cross slide: 640 mm
(HT-1120) Swing over cross slide: 800 mm
(HT-1220) Swing over cross slide: 900 mm
Distance between centres: 1000/1500/2000/3000/4000/5000/6000/7000 mm

Bed
(HT-860) Swing over gap: 1200 mm
(HT-960) Swing over gap: 1300 mm
(HT-1120) Swing over gap: 1460 mm
(HT-1220) Swing over gap: 1560 mm
Width of Bed: 510 mm (20 in)
Length of gap (spindle end face): 240 mm
(1000) Length of bed: 3300 mm
(1500) Length of bed: 3800 mm
(2000) Length of bed: 4300 mm
(3000) Length of bed: 5300 mm
(4000) Length of bed: 6300 mm
(5000/6000/7000) Length of bed: 7300/8300/9300 mm

Headstock
Spindle bore diameter: 105 mm (4 in); optional 152 mm (6 in)
Number of spindle speeds: HT-860/960/1120: 12 steps; HT-1220: 16 steps
Range of spindle speeds: HT-860: 23-1300 rpm; HT-960/1120: 16-810 rpm; HT-1220: 4-420 rpm
Spindle nose: HT-860: A2-8; HT-960/1120/1220: A2-11

Carriage
Width of Carriage: 660 mm
Cross slide travel: 510 mm
Top slide travel (Compound Slide): 370 mm
Maximum tool shank size: 32 x 32 mm

Tailstock
Diameter of barrel: 125 mm
Travel of barrel: 300 mm
Taper of barrel: MT6

Threads
Lead screw diameter & pitch: 45 mm diameter x 12 mm pitch
Range of metric pitches: 0.8-14 mm (65)
Range of imperial pitches: 2-28 TPI (36)
Range of diametrical pitches: 4-56 DP (36)
Range of module pitches: 0.5-7 MP (22)

Feeds
Feed rod diameter: 32 mm
Range of longitudinal Feeds: 0.050-0.70 mm/rev
Range of cross Feeds: 0.025-0.35 mm/rev

Motor
Main spindle Motor: 15 HP; optional 20 HP (6 in spindle-bore models)
Coolant pump Motor: 1/8 HP
Rapid Motor: 1/4 HP

Denver LA Series lathes are Denvers small compact precision lathes. Available in the following sizes:
Swing: 460 & 560
Between Centres: 500, 750, 1000, 1500 & 2000mm

-One piece Meehamite casting machine base.
-Metric & inch gear box with full range of inch, metric, DP, MP threading and multiple threads, all function is reached without change gear.
- Apron enforced oil supply with safety device is used to avoid collision.
- Bed ways & face of compound rest have been ultra-frequency treated & ground with longer life.
- Cross way feeding guides screw: 2 points support for heavy cutting.
- Length safety foot brake.
- Dynamically balanced alloy spindle by 3 point support.
- The gears in headstock and spindle are hardened & precision ground.

Capacity
(LA-460) Swing over bed: 460mm
(LA-560) Swing over bed: 560mm
(LA-460) Swing over cross slide: 280mm
(LA-560) Swing over cross slide: 380mm
Distance between centres: 500/750/1000/1500/2000mm

Bed
(LA-460) Swing over gap: 680mm
(LA-560) Swing over gap: 780mm
Width of Bed: 317mm
Width of gap (spindle end face) 210mm
(500) Length of bed: 1490mm
(750) Length of bed: 1740mm
(1000) Length of bed: 1990mm
(1500) Length of bed: 2490mm
(2000)Length of bed: 2990mm

Headstock
Spindle bore diameter: ø52
Numbered of spindle speeds: 8 steps
Range of spindle speeds : 80-1400 rpm.
Spindle nose: ASA A1-6

Carriage
Width of Carriage: 485mm
Cross slide travel: 250mm
Top slide travel (Compound Slide): 125mm
Tool shank: 20x20mm

Tailstock
Diameter of barrel: Ø52
Travel of barrel: 140mm
Taper of barrel: MT4

Threads
Lead screw diameter & pitch: Dia 35mm/Pitch 6mm & Dia 1" x 4 T.P.I
Range of metric pitches: 0.2 - 14 ( 41Nos )
Range of imperial pitches: 2 - 56 T.P.I. (37Nos )
Range of diametrical pitches: 8-44 D.P. ( 21Nos )
Range of module pitches: 0.3-3.5 M.P. (18Nos)

Feeds
Feed rod diameter: 22mm
Range of longitudinal Feeds: 0.04 - 1.0 mm/rev
Range of cross Feeds: 0.02- 1 mm/rev

Motor
Main spindle Motor: 5HP (Optional 7.5 HP)
Coolant pump Motor: 1/8 HP