This machine is designed for turning and machining large workpieces and steel bar stock. It is well suited to demanding industrial applications, including oil and gas pipeline production, aerospace manufacturing and heavy-duty shaft machining.
1. Spindle and Headstock
-The spindle is available with either a 105 mm (4 in) or 152 mm (6 in) bore and provides 12 spindle speeds. A turbine-type speed-change mechanism helps prevent gear jumping, while the headstock is supported at three points to provide excellent rigidity and stability.
-Models with a spindle bore of 152 mm (6 in) or larger are equipped with an adjustable electromagnetic brake. This allows the braking response to be adapted to different workpiece materials and spindle speeds.
-The gears and shafts are manufactured from high-grade alloy steel and supported by quality NSK bearings, providing durable cutting performance and reduced operating noise.
-A sealed oil-bath lubrication system uses a mechanical pump to provide forced oil circulation, ensuring consistent and effective lubrication throughout the headstock.
The headstock shown is equipped with a 152 mm (6 in) spindle bore and a 12-speed spindle system.
2. Base
The machine bed is manufactured from high-strength Meehanite cast iron and carefully stabilised to maintain alignment and machining accuracy. The bedways are induction-hardened and precision-ground for excellent wear resistance and long service life.
The one-piece cast base provides superior rigidity and stability, supporting greater machining capacity under demanding operating conditions.
3. Gearbox
The quick-change universal gearbox supports metric, imperial, diametrical-pitch (DP), module-pitch (MP) and multiple-start thread cutting without requiring change gears. Its broad threading range and straightforward controls improve operating efficiency and productivity.
4. Tailstock
The tailstock features a two-stage feed mechanism and a saddle-assisted movement system, allowing the tailstock body to travel smoothly along the bed with minimal operator effort.
5. Electrical System
The machine is equipped with a 20 HP motor, a two-stage safety start-up system and overload protection that automatically disconnects the power supply if an unsafe load is detected.
6. Apron
The apron is equipped with rapid traverse, forward and reverse movement, and an integrated safety mechanism. A sealed oil-bath system provides automatic lubrication, while rapid cross-feed improves operating efficiency.
7. Saddle
The saddle surfaces receive an anti-friction treatment and are supplied with regular oil lubrication, reducing wear and ensuring smooth, durable operation.
8. Castings
The principal structural components, including the base, headstock, saddle and tailstock, are manufactured from high-quality FC-30 cast iron. These components are annealed to relieve internal stresses, improve dimensional stability and minimise deformation.
9. Precision Treatment
Critical components—including the bedways, spindle, saddle, cross-slide dovetail surfaces, top slide and tailstock quill—are treated using high-frequency hardening to improve surface hardness, wear resistance and service life.
Capacity
(HT-860) Swing over bed: 860 mm
(HT-960) Swing over bed: 960 mm
(HT-1120) Swing over bed: 1120 mm
(HT-1220) Swing over bed: 1220 mm
(HT-860) Swing over cross slide: 540 mm
(HT-960) Swing over cross slide: 640 mm
(HT-1120) Swing over cross slide: 800 mm
(HT-1220) Swing over cross slide: 900 mm
Distance between centres: 1000/1500/2000/3000/4000/5000/6000/7000 mm
Bed
(HT-860) Swing over gap: 1200 mm
(HT-960) Swing over gap: 1300 mm
(HT-1120) Swing over gap: 1460 mm
(HT-1220) Swing over gap: 1560 mm
Width of Bed: 510 mm (20 in)
Length of gap (spindle end face): 240 mm
(1000) Length of bed: 3300 mm
(1500) Length of bed: 3800 mm
(2000) Length of bed: 4300 mm
(3000) Length of bed: 5300 mm
(4000) Length of bed: 6300 mm
(5000/6000/7000) Length of bed: 7300/8300/9300 mm
Headstock
Spindle bore diameter: 105 mm (4 in); optional 152 mm (6 in)
Number of spindle speeds: HT-860/960/1120: 12 steps; HT-1220: 16 steps
Range of spindle speeds: HT-860: 23-1300 rpm; HT-960/1120: 16-810 rpm; HT-1220: 4-420 rpm
Spindle nose: HT-860: A2-8; HT-960/1120/1220: A2-11
Carriage
Width of Carriage: 660 mm
Cross slide travel: 510 mm
Top slide travel (Compound Slide): 370 mm
Maximum tool shank size: 32 x 32 mm
Tailstock
Diameter of barrel: 125 mm
Travel of barrel: 300 mm
Taper of barrel: MT6
Threads
Lead screw diameter & pitch: 45 mm diameter x 12 mm pitch
Range of metric pitches: 0.8-14 mm (65)
Range of imperial pitches: 2-28 TPI (36)
Range of diametrical pitches: 4-56 DP (36)
Range of module pitches: 0.5-7 MP (22)
Feeds
Feed rod diameter: 32 mm
Range of longitudinal Feeds: 0.050-0.70 mm/rev
Range of cross Feeds: 0.025-0.35 mm/rev
Motor
Main spindle Motor: 15 HP; optional 20 HP (6 in spindle-bore models)
Coolant pump Motor: 1/8 HP
Rapid Motor: 1/4 HP
Denver's HG series lathes are designed for demanding heavy-duty machining applications. It combines straightforward operation with excellent rigidity, stability and load-bearing capacity, making it ideal for the heavy turning of moulds, gears, wheels, shafts, spindles and similar components.
Base
The rigid base is manufactured from high-quality Meehanite cast iron for heavy-duty cutting. Its robust construction provides increased load capacity and greater stability during machining.
Compound Rest
A four-point clamping system provides excellent compound-rest stability. The wide toolpost and top slide are induction-hardened and precision-ground to ensure accuracy and a long service life.
Spindle and Headstock
The headstock provides 12 spindle speeds, while the spindle is supported at three points by precision bearings. The gears and spindle are manufactured from high-quality alloy steel, heat-treated and precision-ground for superior hardness, strength and durability.
The spindle is available with either an 80 mm or 105 mm bore.
Gearbox
The metric and imperial gearbox supports metric, imperial, diametrical-pitch (DP), module-pitch (MP) and multiple-start thread cutting without requiring change gears. Its wide threading range and straightforward operation help improve productivity.
Imperial threading is available down to 2 TPI, providing a broader threading range and greater operating flexibility than many comparable lathes.
Carriage and Saddle
The bedway contact surfaces are lined with Turcite-B to reduce friction and wear. The dovetail slideway surfaces are induction-hardened and precision-ground to maintain accuracy and provide a long service life.
Apron
A forced-lubrication system ensures that the slideways receive consistent lubrication, helping maintain turning accuracy while reducing wear.
An integrated safety mechanism helps prevent collisions during operation.
Cross-Slide Screw
The cross-slide screw is supported at two points, providing the strength and stability required for heavy-duty turning.
Tailstock
A two-stage tailstock clamping system improves stability during heavy turning and drilling operations.
A two-stage feed mechanism provides greater control and easier operation.
Capacity
(HG-660) Swing over bed: 660mm
(HG-760) Swing over bed: 760mm
(HG-800) Swing over bed: 800mm
(HG-840) Swing over bed: 840mm
(HG-660) Swing over cross slide: 400mm
(HG-760) Swing over cross slide: 500mm
(HG-800) Swing over cross slide: 540mm
(HG-840) Swing over cross slide: 580mm
(HG-660) Swing over gap: 930mm
(HG-760) Swing over gap: 1030 mm
(HG-800) Swing over gap: 107mm
(HG-840) Swing over gap: 1110mm
Distance between centres: 1170/1670/2170/3170/4170/5000mm
Bed
Width of Bed: 420mm
Width of gap (spindle end face): 305mm
(1200) Length of bed: 2600mm
(1700) Length of bed: 3100mm
(2200) Length of bed: 3600mm
(3200) Length of bed: 4600mm
(4200) Length of bed: 5600mm
(5000) Length of bed: 6400mm
Headstock
Spindle bore diameter: 80mm; optional 105mm
Number of spindle speeds: 12 steps
Range of spindle speeds: 23-1300 rpm
Spindle nose: A1-8
Optional: A2-8 for 105 mm bore
Optional: D1-8, D2-8
Optional: A2-11 for 105 mm bore
Carriage
Width of Carriage: 670mm
Cross slide travel: 400mm
Top slide travel (compound slide): HG-660/800:150 mm
Top slide travel (compound slide): HG-760/840:240 mm
Tool shank: 25x25mm
Tailstock
Diameter of barrel: 80mm
Travel of barrel: 200mm
Taper of barrel: MT5
Threads
Lead screw diameter & pitch: 45mm diameter x 12mm pitch/1.77” diameter x 2 TPI
Range of metric pitches: 0.8-14 mm
Range of imperial pitches: 2-28 TPI
Range of diametrical pitches: 4-56 DP
Range of module pitches: 0.5-7 MP
Feeds
Feed rod diameter: 32mm
Range of longitudinal Feeds: 0.05-0.7 mm/rev
Range of cross Feeds: 0.025-0.35 mm/rev
Motor
Main spindle Motor: 10HP (optional 15HP)
Coolant pump Motor: 1/8HP
Denver LA Series lathes are Denvers small compact precision lathes. Available in the following sizes;
Swing: 460 & 560
Between Centres: 500, 750, 1000, 1500 & 2000mm
-One piece Meehamite casting machine base.
-Metric & inch gear box with full range of inch, metric, DP, MP threading and multiple threads, all
function is reached without change gear.
- Apron enforced oil supply with safety device is used to avoid collision.
- Bed ways & face of compound rest have been ultra-frequency treated & ground with longer
life.
- Cross way feeding guides screw: 2 points support for heavy cutting.
- Length safety foot brake.
- Dynamically balanced alloy spindle by 3 point support.
- The gears in headstock and spindle are hardened & precision ground.
Capacity
(LA-460) Swing over bed: 460mm
(LA-560) Swing over bed: 560mm
(LA-460) Swing over cross slide: 280mm
(LA-560) Swing over cross slide: 380mm
Distance between centres: 500/750/1000/1500/2000mm
Bed
(LA-460) Swing over gap: 680mm
(LA-560) Swing over gap: 780mm
Width of Bed: 317mm
Width of gap (spindle end face) 210mm
(500) Length of bed: 1490mm
(750) Length of bed: 1740mm
(1000) Length of bed: 1990mm
(1500) Length of bed: 2490mm
(2000)Length of bed: 2990mm
Headstock
Spindle bore diameter: ø52
Numbered of spindle speeds: 8 steps
Range of spindle speeds : 80-1400 rpm.
Spindle nose: ASA A1-6
Carriage
Width of Carriage: 485mm
Cross slide travel: 250mm
Top slide travel (Compound Slide): 125mm
Tool shank: 20x20mm
Tailstock
Diameter of barrel: Ø52
Travel of barrel: 140mm
Taper of barrel: MT4
Threads
Lead screw diameter & pitch: Dia 35mm/Pitch 6mm & Dia 1" x 4 T.P.I
Range of metric pitches: 0.2 - 14 ( 41Nos )
Range of imperial pitches: 2 - 56 T.P.I. (37Nos )
Range of diametrical pitches: 8-44 D.P. ( 21Nos )
Range of module pitches: 0.3-3.5 M.P. (18Nos)
Feeds
Feed rod diameter: 22mm
Range of longitudinal Feeds: 0.04 - 1.0 mm/rev
Range of cross Feeds: 0.02- 1 mm/rev
Motor
Main spindle Motor: 5HP (Optional 7.5 HP)
Coolant pump Motor: 1/8 HP
ERL1330 & ERL1340 – MADE IN TAIWAN
The Sun Master ERL Series is a range of high-quality Taiwanese-made geared-head precision lathes designed for engineering workshops, maintenance facilities, toolrooms and general machining applications.
Available in two sizes:
ERL1330 – 342mm swing x 760mm between centres
ERL1340 – 342mm swing x 1000mm between centres
Both models feature a heavy-duty geared head, 40mm spindle bore, D1-4 spindle nose and hardened and ground bed ways for excellent rigidity and precision.
KEY FEATURES
* Made in Taiwan
* Heavy-duty geared head design
* 342mm swing over bed
* 205mm swing over cross slide
* Up to 512mm swing in gap
* 760mm or 1000mm between centres
* 40mm spindle bore
* D1-4 spindle nose
* MT5 spindle taper
* 8 spindle speeds
* 80–2000 RPM speed range
* 230mm wide bed
* Hardened and ground bed ways
* Hardened and precision-ground headstock gears
* Heavy-duty forged alloy steel spindle
* Universal gearbox
* Metric and imperial threading
* D.P. and M.P. threading
* Longitudinal and cross power feeds
* Forward and reverse feeds
* Built-in coolant system
* Foot-operated brake
* Safety clutch on feed shaft
* One-shot carriage and top-slide lubrication
* Full-length splash guard
* Work light
MODEL RANGE
ERL1330
Swing Over Bed: 342mm
Distance Between Centres: 760mm
Spindle Bore: 40mm
Spindle Speed: 80–2000 RPM
Approx. Net Weight: 850kg
ERL1340
Swing Over Bed: 342mm
Swing In Gap: 512mm
Distance Between Centres: 1000mm
Spindle Bore: 40mm
Spindle Speed: 80–2000 RPM
Approx. Net Weight: 1000kg
STANDARD ACCESSORIES
* Backplate for 7" chuck
* MT3 dead centre
* MT3 carbide tipped dead centre
* MT5 spindle centre sleeve
* 6 levelling pads
* Tool set and box
* Full-length splash guard
* Work light
* Operation manual and parts list
OPTIONAL ACCESSORIES AVAILABLE
3-jaw chuck, 4-jaw chuck, digital readout system, quick-change tool post, steady rest, follow rest, faceplate, drill chuck and arbor, rotating centre, taper turning attachment and additional guarding options.
IDEAL FOR
Engineering workshops, maintenance departments, fabrication shops, toolrooms, training facilities and general precision machining.
WHY CHOOSE SUN MASTER ERL SERIES?
The ERL Series offers the build quality and precision expected from a Taiwanese-made machine tool in a practical size for general engineering work.
With a rigid 230mm bed, hardened and ground ways, 40mm spindle bore and universal gearbox, these machines are designed to provide reliable and accurate machining across a wide range of turning and threading applications.
AVAILABLE MODELS
ERL1330 – 760mm Between Centres
ERL1340 – 1000mm Between Centres
Competitive freight rates available Australia-wide.
Contact us for pricing, availability, freight, tooling and optional accessories.
RML1430 / RML1440 / RML1460 / RML1630 / RML1640 / RML1660
The Sun Master RML Series is a range of high-quality Taiwanese-made geared-head precision lathes designed for professional engineering, maintenance, manufacturing and general machining applications.
Available with 360mm or 410mm swing over the bed and between-centres capacities from 800mm to 1500mm, the RML Series provides a choice of machine sizes to suit different workshop requirements.
KEY FEATURES
* Made in Taiwan
* Heavy-duty all geared-head design
* 360mm or 410mm swing over bed
* 800mm, 1000mm or 1500mm between centres
* Large 52.5mm spindle bore
* D1-6 spindle nose
* MT6 spindle taper
* 260mm wide bed
* 8 spindle speeds
* 70–1800 RPM standard speed range
* Universal feed gearbox
* Reversible apron
* Metric and imperial threading
* D.P. and M.P. threading
* Longitudinal and cross power feeds
* Hardened and ground bed ways
* Turcite B coating between bed and carriage
* Heavy-duty forged alloy steel spindle
* Built-in coolant system
* Foot-operated brake
* One-piece solid stand
* Full-length splash guard
* CE configuration available on request
MODEL RANGE
RML1430
360mm Swing x 800mm Between Centres
RML1440
360mm Swing x 1000mm Between Centres
RML1460
360mm Swing x 1500mm Between Centres
RML1630
410mm Swing x 800mm Between Centres
RML1640
410mm Swing x 1000mm Between Centres
RML1660
410mm Swing x 1500mm Between Centres
MAIN SPECIFICATIONS
Swing Over Bed: 360mm or 410mm
Swing Over Cross Slide: 212mm or 262mm
Distance Between Centres: 800 / 1000 / 1500mm
Bed Width: 260mm
Spindle Bore: 52.5mm
Spindle Nose: D1-6
Spindle Taper: MT6
Standard Spindle Speeds: 8
Standard Speed Range: 70–1800 RPM
Cross Slide Travel: 220mm
Top Slide Travel: 125mm
Tailstock Quill Diameter: 52mm
Tailstock Quill Travel: 152mm
Tailstock Taper: MT4
Main Motor: 5HP
STANDARD ACCESSORIES
* Backplate for 9" chuck
* MT4 dead centre
* MT4 carbide tipped dead centre
* MT6 spindle centre sleeve
* 6 levelling pads
* Tool set and box
* Full-length splash guard
* Work light
* Operation manual and parts list
OPTIONAL ACCESSORIES
3-jaw chuck, 4-jaw chuck, digital readout system, quick-change tool post, steady rest, follow rest, faceplate, drill chuck and arbor, rotating centre, taper turning attachment, 5C collet closer and chuck safety guarding.
IDEAL FOR
Engineering workshops, maintenance departments, manufacturing facilities, fabrication shops, toolrooms, training facilities and general precision machining.
WHY CHOOSE THE RML SERIES?
The Sun Master RML Series provides a heavier and larger-capacity option for workshops requiring a robust conventional lathe.
With a 260mm wide hardened and ground bed, large 52.5mm spindle bore, D1-6 spindle nose and universal gearbox, the RML Series is built for reliable professional machining.
Choose from six models with either 360mm or 410mm swing and 800mm, 1000mm or 1500mm between centres.
Competitive freight rates available Australia-wide.
Contact us for pricing, availability, freight, tooling and optional accessories.
TC-1640 / TC-1660 / TC-1840 / TC-1860
The Sun Master TC Series is a range of heavy-duty Taiwanese-made geared-head precision lathes designed for professional engineering, maintenance, manufacturing and general machining applications.
Available with 410mm or 462mm swing over the bed and 1000mm or 1500mm between centres, the TC Series offers excellent capacity, rigidity and versatility for demanding workshop applications.
KEY FEATURES
* Made in Taiwan
* Heavy-duty all geared-head design
* 410mm or 462mm swing over bed
* 1000mm or 1500mm between centres
* Large 65mm spindle bore
* D1-6 spindle nose
* 305mm wide heavy-duty bed
* 12 spindle speeds
* 36–1800 RPM speed range
* 5HP main spindle motor
* Hardened and ground bed ways
* Turcite B coating between bed and carriage
* Metric and imperial threading
* D.P. and M.P. threading
* Longitudinal and cross power feeds
* Built-in coolant system
* Foot-operated brake
* Full-length splash guard
* Work light
* CE electrical system available as an option
MODEL RANGE
TC-1640
410mm Swing x 1000mm Between Centres
620mm Swing in Gap
Approx. Net Weight: 1600kg
TC-1660
410mm Swing x 1500mm Between Centres
620mm Swing in Gap
Approx. Net Weight: 1750kg
TC-1840
462mm Swing x 1000mm Between Centres
652mm Swing in Gap
Approx. Net Weight: 1650kg
TC-1860
462mm Swing x 1500mm Between Centres
652mm Swing in Gap
Approx. Net Weight: 1800kg
MAIN SPECIFICATIONS
Swing Over Bed: 410mm or 462mm
Swing Over Cross Slide: 255mm or 305mm
Swing In Gap: 620mm or 652mm
Distance Between Centres: 1000mm or 1500mm
Bed Width: 305mm
Spindle Bore: 65mm
Spindle Nose: D1-6
Spindle Speeds: 12
Speed Range: 36–1800 RPM
Cross Slide Travel: 250mm or 260mm
Top Slide Travel: 155mm
Tailstock Quill Diameter: 59mm
Tailstock Quill Travel: 127mm
Tailstock Taper: MT4
Main Motor: 5HP / 3.75kW
STANDARD ACCESSORIES
* Backplate for 9" chuck
* MT4 dead centre
* MT4 carbide tipped dead centre
* Spindle centre sleeve
* 6 levelling pads
* Tool set and box
* Full-length splash guard
* Work light
* Operation manual and parts list
OPTIONAL ACCESSORIES
3-jaw chuck, 4-jaw chuck, digital readout system, quick-change tool post, steady rest, follow rest, faceplate, drill chuck and arbor, rotating centre, taper turning attachment, chuck safety guard and CE electrical package.
IDEAL FOR
Engineering workshops, maintenance departments, manufacturing facilities, fabrication shops, toolrooms, training facilities and general heavy-duty precision machining.
WHY CHOOSE THE TC SERIES?
The Sun Master TC Series is an excellent choice for workshops requiring greater capacity and rigidity from a conventional manual lathe.
With a heavy 305mm wide bed, large 65mm spindle bore, 12-speed geared head and up to 1500mm between centres, the TC Series is built for serious professional machining.
Choose from four models with either 410mm or 462mm swing and 1000mm or 1500mm between centres.
Competitive freight rates available Australia-wide.
Contact us for pricing, availability, freight, tooling and optional accessories.
FC-1640 / FC-1660 / FC-1840 / FC-1860 / FC-1880 / FC-2140 / FC-2160 / FC-2180
The Sun Master FC Series is a range of heavy-duty Taiwanese-made geared-head precision lathes designed for demanding engineering, maintenance, manufacturing and general machining applications.
With swing capacities from 410mm to 542mm, between-centres capacities from 1000mm to 2200mm and a large 80mm spindle bore, the FC Series provides excellent capacity and rigidity for professional workshops.
KEY FEATURES
* Made in Taiwan
* Heavy-duty all geared-head design
* 410mm, 462mm or 542mm swing over bed
* 1000mm, 1500mm or 2200mm between centres
* Large 80mm spindle bore
* D1-8 spindle nose
* Heavy-duty 320mm wide bed
* 12 spindle speeds
* 26–1500 RPM speed range
* Powerful 10HP / 7.5kW main motor
* Hardened and ground bed ways
* Hardened and precision-ground headstock gears
* Heavy-duty forged alloy steel spindle
* Universal feed gearbox
* Metric and imperial threading
* D.P. and M.P. threading
* Longitudinal and cross power feeds
* Turcite B coating between bed and carriage
* Built-in coolant system
* Foot-operated brake
* Full-length splash guard
* Work light
* CE configuration available on request
MODEL RANGE
FC-1640
410mm Swing x 1000mm Between Centres
FC-1660
410mm Swing x 1500mm Between Centres
FC-1840
462mm Swing x 1000mm Between Centres
FC-1860
462mm Swing x 1500mm Between Centres
FC-1880
462mm Swing x 2200mm Between Centres
FC-2140
542mm Swing x 1000mm Between Centres
FC-2160
542mm Swing x 1500mm Between Centres
FC-2180
542mm Swing x 2200mm Between Centres
MAIN SPECIFICATIONS
Swing Over Bed: 410 / 462 / 542mm
Swing In Gap: 583 / 650 / 730mm
Swing Over Cross Slide: 262 / 305 / 387mm
Distance Between Centres: 1000 / 1500 / 2200mm
Bed Width: 320mm
Spindle Bore: 80mm
Spindle Nose: D1-8
Spindle Speeds: 12
Speed Range: 26–1500 RPM
Metric Threads: 0.2–14mm
Imperial Threads: 2–72 TPI
Tailstock Taper: MT4
Main Motor: 10HP / 7.5kW
STANDARD ACCESSORIES
* Backplate for 10" chuck
* MT5 dead centre
* MT4 carbide tipped dead centre
* Spindle centre sleeve
* 6 levelling pads
* Tool set and box
* Full-length splash guard
* Work light
* Operation manual and parts list
OPTIONAL ACCESSORIES
3-jaw chuck, 4-jaw chuck, digital readout system, quick-change tool post, steady rest, follow rest, faceplate, drill chuck and arbor, rotating centre, taper turning attachment, chuck safety guard and CE electrical package.
IDEAL FOR
Engineering workshops, heavy maintenance facilities, manufacturing, fabrication, mining workshops, toolrooms and general heavy-duty precision machining.
WHY CHOOSE THE FC SERIES?
The Sun Master FC Series is designed for workshops requiring greater capacity from a professional conventional lathe.
With an 80mm spindle bore, heavy 320mm wide bed, 10HP main motor and up to 2200mm between centres, the FC Series provides the capacity and rigidity required for larger and heavier machining applications.
Choose from eight models with 410mm, 462mm or 542mm swing and up to 2200mm between centres.
Competitive freight rates available Australia-wide.
Contact us for pricing, availability, freight, tooling and optional accessories.
22" / 26" / 30" SWING – UP TO 5000MM BETWEEN CENTRES
The Sun Master CH Series is a range of heavy-duty Taiwanese-made geared-head manual lathes designed for demanding engineering, mining, maintenance, manufacturing and heavy machining applications.
Available with 560mm, 660mm or 760mm swing over the bed and between-centres capacities from 1500mm to 5000mm, the CH Series provides serious machining capacity for larger and heavier workpieces.
KEY FEATURES
* Made in Taiwan
* Heavy-duty all geared-head design
* 560mm, 660mm or 760mm swing over bed
* 1500mm to 5000mm between centres
* Large 104mm spindle bore
* D1-11 camlock spindle nose
* Heavy-duty 400mm wide bed
* 12 spindle speeds
* 13–1200 RPM speed range
* 15HP / 11.25kW standard main motor
* Optional 20HP / 15kW main motor
* Hardened and ground bed ways
* Heavy-duty forged alloy steel spindle
* Hardened and precision-ground headstock gears
* Universal gearbox
* Metric and imperial threading
* Longitudinal and cross power feeds
* Heavy-duty MT5 tailstock
* Foot brake
* Dual mechanical and electrical braking system
* Automatic and manual lubrication
* Built-in coolant system
* Full-length splash guard
* Work light
* CE electrical configuration available
MODEL RANGE
22" SERIES
CH-2260 – 560mm Swing x 1500mm Between Centres
CH-2290 – 560mm Swing x 2300mm Between Centres
CH-22120 – 560mm Swing x 3000mm Between Centres
CH-22160 – 560mm Swing x 4000mm Between Centres
CH-22200 – 560mm Swing x 5000mm Between Centres
26" SERIES
CH-2660 – 660mm Swing x 1500mm Between Centres
CH-2690 – 660mm Swing x 2300mm Between Centres
CH-26120 – 660mm Swing x 3000mm Between Centres
CH-26160 – 660mm Swing x 4000mm Between Centres
CH-26200 – 660mm Swing x 5000mm Between Centres
30" SERIES
CH-3060 – 760mm Swing x 1500mm Between Centres
CH-3090 – 760mm Swing x 2300mm Between Centres
CH-30120 – 760mm Swing x 3000mm Between Centres
CH-30160 – 760mm Swing x 4000mm Between Centres
CH-30200 – 760mm Swing x 5000mm Between Centres
MAIN SPECIFICATIONS
Swing Over Bed: 560 / 660 / 760mm
Swing In Gap: 797 / 892 / 990mm
Swing Over Cross Slide: 340 / 445 / 548mm
Distance Between Centres: 1500 / 2300 / 3000 / 4000 / 5000mm
Bed Width: 400mm
Spindle Bore: 104mm
Spindle Nose: D1-11
Spindle Speeds: 12
Speed Range: 13–1200 RPM
Tailstock Quill Diameter: 80mm
Tailstock Quill Travel: 250mm
Tailstock Taper: MT5
Main Motor: 15HP / 11.25kW
Optional Main Motor: 20HP / 15kW
STANDARD ACCESSORIES
* Backplate for 12" chuck
* MT5 dead centre
* MT5 carbide tipped dead centre
* MT7 to MT5 spindle centre sleeve
* Levelling pads
* Tool set and box
* Full-length splash guard
* Work light
* Operation manual and parts list
OPTIONAL ACCESSORIES
3-jaw and 4-jaw chucks, digital readout system, quick-change tool post, steady rest, follow rest, 20" faceplate, drill chuck and arbor, rotating centre, taper turning attachment, chuck safety guard and CE electrical system.
IDEAL FOR
Heavy engineering, mining workshops, equipment repair, heavy maintenance, manufacturing, fabrication, shaft machining, large component repair and general heavy-duty turning applications.
WHY CHOOSE THE CH SERIES?
The Sun Master CH Series is designed for workshops requiring serious capacity from a conventional manual lathe.
With a massive 104mm spindle bore, 400mm wide bed, up to 760mm swing and up to 5000mm between centres, the CH Series provides the capacity and rigidity required for large and heavy machining applications.
Choose from 15 models across the 22", 26" and 30" ranges.
Competitive freight rates available Australia-wide.
Contact us for pricing, availability, freight, tooling and optional accessories.
No results match your search. Try removing a few filters.
